Back-to-School Safety Tips for Motorists

Sharing the road safely with school buses
School buses are one of the safest forms of transportation on the road today. In fact, according to the National Highway Traffic Safety Administration, riding a bus to school is 13 times safer than riding in a passenger vehicle and 10 times safer than walking to school. The reality of school bus safety is that more children are hurt outside the bus than inside as passengers. Most of the children who lose their lives in bus-related crashes are pedestrians, four to seven years old, who are hit by the bus or by motorists illegally passing a stopped school bus. For this reason, it is necessary to know the proper laws and procedures for sharing the road safely with school buses:

All 50 states have a law making it illegal to pass a school bus that is stopped to load or unload children.

School buses use yellow flashing lights to alert motorists that they are preparing to stop to load or unload children. Red flashing lights and an extended stop sign arm signals to motorists that the bus is stopped and children are getting on or off the bus.

All 50 states require that traffic in both directions stop on undivided roadways when students are entering or exiting a school bus.

While state laws vary on what is required on a divided roadway, in all cases, traffic behind the school bus (traveling in the same direction) must stop.

The area 10 feet around a school bus is where children are in the most danger of being hit. Stop your car far enough from the bus to allow children the necessary space to safely enter and exit the bus.

Be alert. Children are unpredictable. Children walking to or from their bus are usually very comfortable with their surroundings. This makes them more likely to take risks, ignore hazards or fail to look both ways when crossing the street.

Never pass a school bus on the right. It is illegal and could have tragic consequences.

Sharing the road safely with child pedestrians
All drivers need to recognize the special safety needs of pedestrians, especially those that are children. Young, elderly, disabled and intoxicated pedestrians are the most frequent victims in auto-pedestrian collisions. Generally, pedestrians have the right-of-way at all intersections; however, regardless of the rules of the road or right-of-way, you as a driver are obligated to exercise great care and extreme caution to avoid striking pedestrians.

Drivers should not block the crosswalk when stopped at a red light or waiting to make a turn. Do not stop with a portion of your vehicle over the crosswalk. Blocking the crosswalk forces pedestrians to go around your vehicle and puts them in a dangerous situation.

In a school zone when a warning flasher or flashers are blinking, you must stop to yield the right-of-way to a pedestrian crossing the roadway within a marked crosswalk or at an intersection with no marked crosswalk.

Always stop when directed to do so by a school patrol sign, school patrol officer or designated crossing guard.

Children are the least predictable pedestrians and the most difficult to see. Take extra care to look out for children not only in school zones, but also in residential areas, playgrounds and parks.

Don’t honk your horn, rev your engine or do anything to rush or scare a pedestrian in front of your car, even if you have the legal right-of-way.

Sharing the road safely with child bicyclists
On most roadways, bicyclists have the same rights and responsibilities as other roadway users and often share the same lane, but bicycles can be hard to see. The riders are exposed and easily injured in a collision. Oncoming bicycle traffic is often overlooked and its speed misjudged. Children riding bicycles create special problems for drivers because they are not capable of proper judgment in determining traffic conditions.

When passing a bicyclist proceeding in the same direction, do so slowly and leave at least a distance between you and the bicycle of no less than 3 feet. Maintain this clearance until you have safely passed the bicycle.

The most common causes of collisions are drivers turning left in front of an oncoming bicycle or turning right, across the path of the bicycle.

When your vehicle is turning left and there is a bicyclist entering the intersection from the opposite direction, you should wait for the bicyclist to pass before making the turn.

If your vehicle is turning right and a bicyclist is approaching on the right, let the bicyclist go through the intersection first before making a right turn. Remember to always use your turn signals.

Watch for bicycle riders turning in front of you without looking or signaling, especially if the rider is a child.

Take extra precautions in school zones and neighborhood areas where children and teenagers might be riding.

Watch out for bikes coming out of driveways or from behind parked cars or other obstructions.

Check side mirrors for bicyclists before opening the door. Some communities may fine drivers for collisions caused by opening a vehicle door in the path of a bicyclist.

Featured

  • Maximizing Your Security Budget This Year

    Perimeter Security Standards for Multi-Site Businesses

    When you run or own a business that has multiple locations, it is important to set clear perimeter security standards. By doing this, it allows you to assess and mitigate any potential threats or risks at each site or location efficiently and effectively. Read Now

  • ISC West 2024 is a Rousing Success

    The 2024 ISC West security tradeshow marked a pivotal moment in the industry, showcasing cutting-edge technology and innovative solutions to address evolving security challenges. Exhibitors left the event with a profound sense of satisfaction, as they witnessed a high level of engagement from attendees and forged valuable connections with potential clients and partners. Read Now

    • Industry Events
    • ISC West
  • Live From ISC West: Day 2

    What a great show ISC West 2024 has been so far. The second day on Thursday was as busy or even more hectic than the first. Remember to keep tabs on our Live From ISC West page for news and updates from the show floor at the Sands Expo, because there’s more news coming out than anyone could be expected to keep track of. Read Now

    • Industry Events
    • ISC West
  • A Unique Perspective on ISC West 2024

    Navigating a tradeshow post-knee surgery can be quite the endeavor, but utilizing an electric scooter adds an interesting twist to the experience. While it may initially feel like a limitation, it actually provides a unique perspective on traversing through the bustling crowds and expansive exhibition halls. Read Now

    • Industry Events
    • ISC West

Featured Cybersecurity

Webinars

New Products

  • HD2055 Modular Barricade

    Delta Scientific’s electric HD2055 modular shallow foundation barricade is tested to ASTM M50/P1 with negative penetration from the vehicle upon impact. With a shallow foundation of only 24 inches, the HD2055 can be installed without worrying about buried power lines and other below grade obstructions. The modular make-up of the barrier also allows you to cover wider roadways by adding additional modules to the system. The HD2055 boasts an Emergency Fast Operation of 1.5 seconds giving the guard ample time to deploy under a high threat situation. 3

  • ComNet CNGE6FX2TX4PoE

    The ComNet cost-efficient CNGE6FX2TX4PoE is a six-port switch that offers four Gbps TX ports that support the IEEE802.3at standard and provide up to 30 watts of PoE to PDs. It also has a dedicated FX/TX combination port as well as a single FX SFP to act as an additional port or an uplink port, giving the user additional options in managing network traffic. The CNGE6FX2TX4PoE is designed for use in unconditioned environments and typically used in perimeter surveillance. 3

  • Hanwha QNO-7012R

    Hanwha QNO-7012R

    The Q Series cameras are equipped with an Open Platform chipset for easy and seamless integration with third-party systems and solutions, and analog video output (CVBS) support for easy camera positioning during installation. A suite of on-board intelligent video analytics covers tampering, directional/virtual line detection, defocus detection, enter/exit, and motion detection. 3